EdtOCConfig Struct Reference
[OCM/OC192 Library, OCM/OC192 Library]

#include <edt_ocm.h>

---

Detailed Description

Structure used to pass configuration parameters to the edt_ocx_xxx routines.

Definition at line 452 of file edt_ocm.h.

Data Fields
u_char	demux_mask [192]
u_int	flags
	option flags :
edt_bitpath	intfc
	alternate interface bitfile
EdtLineRate	line_rate
	Line Rate constant for desired line rate.
edt_bitpath	mezz_0
	alternate mezzanine bitfile channel 0
edt_bitpath	mezz_1
	alternate mezzanine bitfile channel 1
int	tagid
	< bit mask array
int	timeout
	timeout in ms
char	tributary [6]

---

Field Documentation

u_int EdtOCConfig::flags

option flags :

Flags for edt_ocx_configure low three bits describe the bit and byte order

• EDT_OCX_BYTE_SWAP
• EDT_OCX_SHORT_SWAP
• EDT_OCX_LSB_FIRST
• EDT_OCX_SWAP
  Both swaps give network order on x86 architecture
• EDT_OCX_FRAMED
  Turn on framing
• EDT_OCX_DESCRAMBLE
  Turn on descrambler
• EDT_OCX_ENABLE_MEM
  Turn on mezzanine memory
• EDT_OCX_OVHD_ONLY
  Filter out overhead only
• EDT_OCX_PRBS_EN
  Turn on PRBS pattern generator in LIU
• EDT_OCX_SKIP_LOAD
  Disable loading correct bitfile - fail instead
• EDT_OCX_FULL_INIT
  Initialize baseboard as well as mezzanine
• EDT_OCX_LOOPBACK
  Enable loop back through LIU
• EDT_OCX_REMOTE_LPBK
  Enable remote loopback from LIU
• EDT_OCX_TAGGED_DATA
  Turn on tagged data

Definition at line 455 of file edt_ocm.h.

---