EDT | Telecommunications & Telemetry | Satellite interfaces & signal receivers

Company | Partners | Careers | Contact

		Satellite interfaces & signal receivers EDT's SRXL and DRX series boards provide reception and signal transfer for a variety of signal receiving and satellite based applications. Board-based products can be installed directly in PCI, PCI Express, and AMC computers, providing high-bandwidth connections for a fraction of the cost of similar alternatives.
	SRXL Satellite telemetry and signal receiver, allows simultaneous input of IF and L-Band signals from 925-2175 MHz and an IF range of 65-225 MHz. Powerful Xilinx Spartan 3 FPGA for signal processing or configurable switch matrix to the main board. Mezzanine board, mounts to the PCI GS, PCI SS, or PCIe8 LX main board.

	SRXL2 Satellite telemetry and signal receiver, allows simultaneous input of IF and L-Band signals from 900-2250 MHz and an IF range of 70, 140 or 160 MHz. Powerful Xilinx Virtex 4 SX FPGA for signal processing or configurable switch matrix to the main board. Mezzanine board, mounts to the PCI GS or PCIe8 LX main board.

	DRX16 Dual IF signal receiver with 16-bit analog-to-digital converters (ADCs) and large configurable XILINX FPGA. Can receive both channels simultaneously, and each channel provides one IF direct module (IDX) that supports any frequency from DC to 300 MHz. Mezzanine board, mounts to the PCI GS, PCI SS, or PCIe8 LX main board.

	DRX Dual IF signal receiver with 16-bit analog-to-digital converters (ADCs) and large configurable FPGA. For each channel, you can choose a lowpass filter or a bandpass filter. Designed for AMC uTCA systems, pairs with the EDT AMC FX5 main board.

Engineering Design Team
1400 NW Compton Dr, Suite 315
Beaverton, OR 97006