|
|
 |
|
Software and Drivers
Documentation
Specifications
Cables
|
|
|
|
| The PCI GP-SSE is a legacy product, with limited availablity to existing customers only. Please see the PCI SS, GS, PCIe8lx SSE board which has superseded this product.
|
- 2 channels (one in/out, one in only)
- 1 data bit per channel
- ECL compatible driver/receivers
- Transfer rates up to 400 Megabits per second per channel
- Implements a high-speed DMA channel between an external device and PCIBus computer
- Customized by a Ram based programmable gate array
- Single short PCIBus slot
- Low cost
The PCI GP-SSE board samples the data on the rising edge of the clock and stores it in host memory by the PCI GP-SSE DMA. It provides a simple, flexible low cost solution for Telemetry, Satellite and Monitoring applications.
Two 9 pin D connectors are provided, one for each channel. Each channel accepts a differential data signal (two wires) and a differential clock (two more wires) at standard ECL signal levels. All incoming signals are terminated through 50 ohms to -2 volts.
- Telemetry Receiver
- Monitoring Serial Data Communications
- Satellite Ground Station Support
Device drivers for Solaris™, Windows tm, and Linux are included with the PCI GP-SSE. VxWorks (selected platforms) and MacOS drivers available on request. The driver provides access to the PCI GP-SSE through standard and asynchronous read and write system calls. A DMA ring buffer management library is provided for high speed continuous transfers.
Custom cables suited to your application can be provided.
EDT provides several levels of customer support, from phone consultation to custom design of hardware and software, at hourly rates.
PCI Local Bus Compliance
PCI 2.1s
33Mhz
32 bits
Data Transfer Protocol: synchronous
Transfer 1, 2, or 4 separate
Connectors
Signals
Standard ECL signal levels, terminated through 50 ohms to -2 volts.
Power
Environmental
Physical
To order, contact our sales department or your distributor. Be sure to specify which cable will be needed (if any).
|
|
