|
|
 |
|
 Data sheet
Drivers and Software
Documentation
|
|
|
|
- One bi-directional multi-rate optical carrier interface, either SONET OC-3/SDH STM-1 (155.52 Mb/sec), OC-12/STM-4 (622.08 Mb/sec), or OC-48/STM-16 (2488.32 Mb/sec)
- One bi-directional multi-rate optical carrier interface for SONET OC-3/SDH STM-1 or OC-12/STM-4 only
- PCI SS main board FPGA options: Xilinx XCV600E, 1000E, or 2000E
- PCI GS main board FPGA options: Xilinx XC2VP50 / 4 Meg or XC2VP70 / 8 Meg
- Optional 2 GB RAM on the OCM mezzanine board
- Optional 8 MB RAM on the PCI SS Main board or 1 GB RAM on the PCI GS Main board
- High-speed DMA channel between interfaces and PCI or PCI Express bus computer
- Compatible with PCI and PCI Express platforms running the Solaris™, Windows™ or Linux operating systems
- Telecomm network monitoring
- Satellite data acquisition
The OCM is a mezzanine board for the PCI SS, PCI GS, or PCIe8 LX
main board, and supports synchronous optical network (SONET) OC-3, OC-12, OC-48 and synchronous data hierarchy (SDH) STM-1, STM-4, STM-16 telecommunications standards. The mezzanine board has two fiber-optic LC connectors. One fiber-optic connector will support the OC-3/STM-1, OC-12/STM-4 or OC-48/STM-16 standard bit rates, while the other fiber-optic connector will support the OC-3/STM-1 or OC-12/STM-4 only.
EDT provides an FPGA configuration file that acquires raw data or detects and synchronizes raw data to a SONET/SDH frame.
Device Drivers for Sun Solaris (Intel and SPARC platform), Linux and Windows are included with purchase of the board. Drivers for VxWorks and MacOS are available on request.
EDT provides several levels of customer support, from phone consultation to custom design of hardware, firmware, or software, at hourly rates. Technical support is also provided though the Technical Information section of this web site.
|
|
