|
Virtually all base mode (i.e. single-connector), and most medium mode cameras are or can be supported by EDT's PCI DV C-Link and other camera link products. Additionally, most medium and full mode cameras are (or can be) supported by EDT's PCIe8 DV C-Link, and specially configured RCX C-Link pairs.
Configuration files are available for the following cameras, which have been tested at EDT labs. If your camera is not on this list, it usually means that you will need to make up a configuration file. EDT is always adding new camera support; for cameras not listed, go here.
For a list of supported LVDS and RS-422 cameras, go here.
- Adimec 1000M, 1600M, 4020M
- Atmel AViiVA SM2, M4
- Basler A102k, A202k, A402kc, A504k, L104k, L301kc
- C-Cam FCi4-14000
- Cohu 7700
- DALSA Pantera, Piranha 2, Spyder, 1M15P, 1M28, 1M60, 1M75, 2M30, 4M30*
- Duncantech (Redlake) DT1100, DT4000, MS2100, MS2150, MS3100, MS4000, MS4100*
- DVC 1312M-CL, 1412M-CL
- Fairchild Imaging Owl CAM/CMOS-2K series
- Hitachi KP-F100ACL, KP-F500SCL
- Illunis MMV2000, XMV4020, XMV11000
- Imperx IPX-11M5, IPX-2M30, IPX-VGA210, IPX-1M48, IPX-11M5, IPX-4M15
- Narragansett FFM 3020D Multi
- PULNiX TM-1020-15CL, TM-1320-15CL, TM-1400, TM-1402CL, TM-4000CL, TM-6700CL, TM-6710CL, TMC-6700CL, TM-6740CL, TM-9730CL
- PCO 1600 **
- Photonfocus MV-1024-28, MV-1024-80
- Redlake ES 4.0, ES1020, ES2020, ES4020, ES11000, ES16000
- Redlake/DuncanTech DT1100, DT4000, MS2100, MS2150, MS3100, MS4000, MS4100*
- Sensors Unlimited (Goodrich) SU640SDV-1.7RT
- Silicon Imaging 640M, 3300RGB, SI3170
- Toshiba IK-SX1
- TVI XIIMUS 4096 CL
- Uniq Vision 600CL, 680CL, 900CL, 2000CL
*Some supported cameras can be run in either base or medium mode; if using a single-connector board such as the PCI DV C-Link/sc or PMC DV C-Link/SC, these cameras can be run only in their base mode configuration.
**Limited modes available; contact EDT for specifics
|